Vaderstad Pack v2.0.0.1 LS2017
Väderstad Pack FS17
Changelog
V 2.0.0.1:
– Additional cameras with own HUD (rafftnix GUI) removed
– Automatic working width adjustment optimized to avoid banding at BioDrill
Included are:
BioSpray 3000
– fertilizer spreader
– 3000L capacity
– Fertilizer application rate adjustable from 120L / Ha to 800L / Ha
– All devices with AttacherLow attachment can be coupled
– Adaptation of the coupling height to the soil tillage implement on devices with AttacherLow attachment via lifting / lowering of the BioSpray
– Working width adjusts automatically to attached device
– Dynamic-pants-ready
BioSpray 4500
– fertilizer spreader
– 4500L capacity
– Fertilizer application rate adjustable from 120L / Ha to 800L / Ha
– All devices with AttacherLow attachment can be coupled
– Adaptation of the coupling height to the soil tillage implement on devices with AttacherLow attachment via lifting / lowering of the BioSpray
– All devices with lower link suspension can be coupled
– Adaptation of the coupling height to the soil tillage implement for devices with lower linkage suspension via mouse control
– Working width adjusts automatically to attached device
– Dynamic-pants-ready
BioDrill
– catch crop
– 450L capacity
– Can sow grass and oil radish
– Can be combined with Amazone Catros from the manure pack
– Working width adjusts automatically to attached device
– Also “Solo” can be used, then working width 10m
Carrier 820 + 1120
– Disc harrow
– working width 8,20m or 11,20m
– Attachable frame for Biodrill can be bought
– Dynamic-pants-ready
TopDown 500 + 700
– Cultivator with plow and cultivator function (configurable)
– Working width 4,80m or 6,80m
– Attachable frame for Biodrill can be bought
– Dynamic-pants-ready
Rapid A800S
– Seeder with fertilizer function
– Tank volume 2x 3000L
– Working width 8,00m
– Dynamic-pants-ready
Rollex 1320
– Harrow
– Working width 13,20m
– Dynamic-pants-ready
With the pack it is possible by combination of different devices to do several jobs in one operation.
If you take e.g. the BioSpray and attach a cultivator (it can be attached to any cultivator with suitable Attacher),
can be fertilized and grubbed at the same time. If you take e.g. the BioSpray and attach a cultivator (it can be attached to any cultivator with a suitable attacher),
you can fertilize and cultivate at the same time. If you take the TopDown with its plow and cultivator function, you can do this at the same time as well.
Fertilized, plowed and cultivated.
If you buy the TopDown with the mounting frame for the BioDrill and connect it to it, you can sow a catch crop while also fertilizing, plowing, and cultivating simultaneously.
The working width of the BioDrill and the BioSpray is automatically adjusted to the preferred soil cultivation device.
Changelog
V 2.0.0.0:
– Bug Rollers Carrier 1120 fixed
– Bug rolls Rollex 1320 fixed
– TopDown 500 – Attachment frame for sowing machine added
– Added BioSpray’s working cameras with dedicated HUD (rafftnix GUI)
– Various improvements to BioSpray’s
– BioSpray’s fertilizer will subgrade now, if attached device is dug, will continue,
when device is lowered again
– BioSpray’s can now be used as an additional fertilizer tank
(Attached device is filled when the level of the attached device falls below 6%, then
is replenished up to 16% when the biospray level is over 5%)
– BioSpray is switched on, fertilizes it and refills the attached device,
if it is switched off, it only serves as an additional fertilizer tank
– a seed drill with fertilizer function is attached to the BioSpray, and the BioSpray is switched on,
fertilizes the BioSpray in front of the drill, and the drill fertilizes again, so two
Dehydration steps in one operation, while the seed drill is also filled (see above)
– BioSpray4500 will now be completely empty
– Working width adjusts to each attached implement properly
– Height and inclination of the BioSpray’s adjustable via MouseControl
