STEYR 8080A SK2 Turbo FS17
Version STEYR_8080_8090_SK2
– Gearbox add on (extended one to the DL, is linked in the description)
– 3 Modorupgrades for STEYR 8080 (BJ 87 without roof light, BJ 89, BJ 91 low noise version) different bonnet inscriptions and tachos
– as bonus are two 8090 SK2
– two engine upgrades (BJ 88, BJ 90 low noise version) different bonnet inscriptions and optics or tachos
– a sound from Steyr 8070 added
– other
Since it already gives the 8070a SK2 and the 8090a Turbo SK2, we thought we would still make a Steyr 8080a Turbo SK2, based on the 8090a Turbo SK2 only with less / other functions.
The 8080a Turbo SK2 can be used well on smaller maps or alpine maps, as a grassland and yard tractor.
ATTENTION: This entry is extended / updated.
INFO: Construction
period: 1979- 1994
Engine: Steyr WD 411.90 (70 HP to BJ 1984, starting from 1984 -> 72 hp)
Transmission: STEYRMatic power
transmission Tank capacity: 96l
BJ: 1989
Weight: 3300 kg
Type label attached
Sound is from a STEYR 8080a Turbo SK2
The snow chains no longer fit the tire profile as well. The times would have to be reworked. The twin wheels have no tire tracks and originate as well as the snow chains from LS13? / LS15 from CebuljCek Modding. We installed the twin tires + snow chains as “emergency solution”, because we work on several projects at the same time. We ask for your understanding.
Functions:
from the outside:
Fitting the front fender on / off Button R Opening / closing the
doors Button R
Open / close the left door Button R Open / remove the
snow chains (front / rear) Button R
Twist the tire (rear only)
Shop Configurations:
Trailer Couplings:
Standard: (only atacher joint, intended for purchaseable
front weights or harness) Front pull: (atacher joint installed, for riding trailers)
Front hydraulics + front sprocket
Front loader attachment:
yes or no
Engine type:
Standard Engine: WD 411.90 (72HP)
Optional: stronger injection pump (+10 HP)
Wheel setup:
standard tires: front : 380/70 / R24 rear:
420/85 / R34 front tires: front: 440/65 / R24 rear:
540/65 / R34 maintenance tires: front: 230/95 / R34 rear: 230/95 / R44
Design:
RUL (LED)
Electronic Upgrade (EHR + “Electronic” -printed with silk-screens)
Electronic Upgrade (EHR + “Electronic” -printed with silk-screen) + RUL
Other functions:
IC control:
front, rear, side windows, roof hatches and doors (including door closing sound) for opening / closing
FH-sub-steering, passenger footrest and sun visors expandable / foldable
windshield
wiper cabine light
Animated / Illuminated:
Tacho, tank and temperature indicator
Turn signal / warning indicator (including turn signal (from a Steyr 8130a SK2))
Indicator / warning indicator flashes as in real:
tractor alone = 1 lantern flashing
tractor + 1 trailer = 2 lights flashing
tractor + 2 trailers = 3 lights flashing
Indicator lights Charge indicator
light integrated (battery lit jz at engine start)
“provisional” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select tractor)
for selected tractor without attached trailers / equipment:
Animated rear hydraulics + levers (right in the tractor) TASTE V, animated lever for the PTO coupling (left in the tractor) BUTTON B is a small tool for moving around the cab, which is pure look Mitbewegen you need a suitable script, we guess. 🙂 With trailers attached you can lift the HH (rear hydraulic) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical. So that the levers with attached devices move with you need a suitable script, we guess. 🙂 With trailers attached you can lift the HH (rear hydraulic) (tractor must be selected) and the lever moves. The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical. So that the levers with attached devices move with you need a suitable script, we guess. 🙂 With trailers attached you can lift the HH (rear hydraulic) (tractor must be selected) and the lever moves. The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.
Other:
washable
Indoorsound (reacts to open windows or doors)
Working light front Button NUM 5
Working light rear Button NUM 6
Pendulum
axle
Passenger scripted installed dipped beam + main light slightly yellow as well as in real life
Required / Recommended Mods:
Front Equipment Pack:
http://www.fsmods17.com/steyr-front-equipment-pack-v2-0-fs17/
Drive Control:
http://www.fsmods17.com/drive-control-v4-10-fs17/
A big thank you goes to Max (MB 3D modeling) because he always lets us change his Steyr 8080a SK1 model and gives us the release release (= his original DL link). (This was introduced to LS13 times by us (STEYR Modding) so and with it (MB3D modeling) arranged.) Thanks to all users who regularly in Facebook: STEYR Modding team participate in our surveys.
