SCANIA V8 HOOK LIFT WITH RAIL TRAILER for LS 17
Version 1.0.4.4
Driving behavior has been completely changed.
The weight was too large, it was reduced and better distributed
Due to the reduced weight I had to reduce the engine power (yet it is now better stretched)
Now the brakes are now announced, because if you hinder it, the trolley leans.
Why was it adjusted?
Since the car was not properly controlled, it was driving and it was getting too late lately.
Hope you find a little more pleasure now
Rail Trailer version 1.0.4.1 still has an attachcher object
Trailer traffic: from 1.0.4.2
Turn from the rear of the trailer trailer Press the X button when the hook is approximately 90 °, then press the Y button, sometimes twice to respond. This is to keep Scania on the underside of the wagon!
The container must now be connected / secured!
In the meantime, take 1-2 meters before and pay attention to the trailer’s point of deduction.
To remove the container from the trailer, you must do the following:
First, disconnect the container from the trailer and automatically switch to a trailer.
Then press the X button and the container transition point disappears.
You can see this by watching the white dome icon in the bottom right corner, if you have a help window open, there’s also something you can do with a trailer, whether it can be plugged in or disconnected.
Only when the dome is off (with the X button) the trailer can be disconnected, otherwise you could turn the container on and off without a trailer all the time to get rid of it.
Of course, the X key is also used to resubmit the dome
You can also tell a trailer directly, but I do not support it because it’s not true!
