Scania R730 HKL v1.0.0.9 for FS 19
Version 1.0.0.9
Rear chassis renewed
Adjusted the weight of the vehicle
New engine sound V8 with gear
Dedi bug fixed
Rail trailer revised.
Weight handling adjusted
Container fixation changed, now runs on the normal fixation and now suitable containers can be used very easily, so I removed the containers and you now need at least the standard itrunner pack
Today I present you the Scania HKL with all the trimmings.
The trailer is as appropriate in the LS17.
The ITR containers that fit on the trailer have been included and there are no complications with the ITR Pack.
The control for the Scania:
K = retract hook
M = extend hook (while the container is being loaded onto the trailer, you can extend the hook so that the truck does not lift off)
J = lower body
N = lift body
This control ONLY serves to get to the container ran without lifting the rear.
If you have the container coupled you can leave everything to the automatic and press X as usual.
The controller for the trailer:
Hold left Shift!
K = Pull Container Attacher to the front
Pull M = Container Attacher to the rear
If the container is coupled, decouple, move attacher so that he is out of range and only then you can decouple the trailer.
You can position yourself with the container exactly where you would like it.
Motor Config consists of the R730 and the chip tuning.
Tire Config consists of a steering axle and without. both Lizard Road and that stays that way!
You can buy bullfighters
Tires and truck Farbwahlt is of course also there.
