LS 22 Lizard P93S Pack v1.3.0.0
P 93 S trailer
Changelog: 1.3.0.0
Another new trailer set (set4) has been added, which has the option for all bodies to configure side discharge windows (Grain Door).
Set0 and Set1 have been extended with AUTOLOAD function, thanks to WeekendFarmers & TopAce888.
For all old sets (set0 – set3) the chassis model and all its moving hose models have been fixed.
In set 1, new package body configurations were added with the option of L-shaped and U-shaped body extensions for transporting boxes, pallets and bigBags.
For the configuration of the sides, combined variations have been added, e.g.: wooden fronts and sheet metal sides and, conversely, sheet metal fronts and wooden sides.
The design configuration for marking trailers with numbers has been extended up to number 50.
Price: 3343.82$
Capacity: 5500-23900 liter
The tractor-trailer – tipping to two sides with a load capacity of 9 tons is a vehicle intended for the transport of loads weighing up to 9,000 kg on roads of all kinds.
The trailer can be supplemented with various types of superstructures and equipment on request.
Trailer length: 6750 mm
Trailer width: 2470 mm
Height of the loading area from the ground: 1300 mm
Weight: 2850 kg
Payload: 9000 kg
Maximum permitted speed: 25 km/h
Other options:
– Choice of colors: wheel hubs, frame, body, silage cage, mesh, rims
– Capacity configuration
– Appearance configuration
– Manual opening of individual sidewalls via mouse movement (works only for a trailer in the TRAILERS section, P93 S configuration – Bale trailer, and for a trailer in the BALE LOADERS section, P93 S configuration – Design 7).
– Required to expand via the X key.
Supported Autoload packages:
– Square: 120cm (140pcs), 180cm (12-15pcs), 220cm (10-12pcs), 240cm (10-11pcs).
– Round: 125cm (14pcs), 150cm (10-12pcs), 180cm (6-8pcs).
– Square Hesston: 180cm (10-12pcs), 220cm (8pcs), 240cm (8pcs).
– Square Fortschritt K-454 (100pcs).
The autoload functions Pro and Easy can be switched – EVERY TIME – by “Toggle work mode”. Default setting: PRO.
Unloading via Mouse Control can be activated and deactivated – EVERY TIME – via key Y, default setting: DISABLED.
– Easy with wide loading trigger (approx. 4m each side).
– Pro, here the bales must be placed on the trailer.
Changelog: 1.0.0.1
Fixed an issue with opening the sidewalls.
Changelog: 1.1.0.0
Fixed screw conveyor control issue.
The auger wagon configuration has been canceled for the base trailer, and a separate transfer trailer has been created in the AUGER WAGON section.
Added two new trailers, for chaff and grapes.
ATTENTION because of separating some of the trailers, we recommend to sell all trailer before update. It will cause them to disappear after update.
Changelog: 1.2.0.0
For set3, where there is a silage chute and a grape chute, the option to configure the right and left sides of the discharge was added.
Fixed mesh visibility for set1.
Added a natural unstained wood option in the sideboard configuration and added a color configuration to dye the wood panels in the sideboards.
The configuration of the coloring of the body and its floor has been adjusted for all bodies, where you can set whether the floor should be colored according to the chassis, or if it should be colored with the sides.
Another set of crates was added, namely set 2, which mainly contains crates for transporting corn chips and blown straw, and a special one with universal boxes for transporting animal feed.
The design configuration for marking trailers with numbers has been extended up to number 22.
