Güllepack V 2.0 FS2017

LS 17 Packs



Güllepack V 2.0 FS2017

Version 2.0
Hallo zusammen,
hier ist nun die Version 2.0 meine Güllepacks.
Was wurde gemacht:
1. Alle Ausbringfässer können nun bei den Fieldjobs genutzt werden.
2. Vogelsang SwingUp funktioniert jetzt an allen Fässern. Zuätzlich könnt ihr jetzt mit eingeklapptem Gestänge mit dem
Prallteller oder ausgeklappt mit dem Schleppschlauchgestänge Güllen. Die Arbeitsbreite liegt bei beidem bei 15 meter.
3. Veenhuis Ein-Achsfass hinzugefügt 16000l kapazität.
4. Helfer gefixt, funktioniert jetzt in allen lebenslagen. Damit sollte auch das Problem bei Courseplay behoben sein.
Vielleicht könnte sich das einer anschauen mit Courseplay.
5. Particleanimationen und Fass schalten jetzt bei leerem Füllstand automatisch ab.
6. Vogelsang SwingMax steht jetzt beim Kauf und beim Zurücksetzen kompett eingeklappt da.
7. Teilbreitenschaltung Paritcleanimation gefixt.
8. Saugrohr vorpositionieren jetzt von 30 bis 160 Grad möglich.
9. Coli in den Saugrohren vom Veenhuis nachgerüstet.
10. Es sind alle Ausbringgeräte mit allen Fässern kompartibel bis auf das SwingMax, das bleibt dem Tandem und Tridem
Veenhuisfässern vorbehalten.
11. Manual attaching funktioniert deshalb nicht, da der mod die zwei von mir verbauten Attacher nicht erkennt, also bitte
an das Manual attachingteam wenden.
So das wars glaub ich. Ach ja habe noch eine Screenshot vom Gamemenue drangehängt, wo man sieht , wo die Inputbindings eingestellt werden. Man sollte nicht glaube, wie viele das nicht wissen, wo die Inputbindings belegt werden.
Danke für euer Feedback. Falls ihr noch was findet, könnt ihr euch ja melden. Den Dedi-Problemen kann ich mich gerade leider nicht annehmen. Da fehlt mir einfach die Zeit, micht da einzuarbeiten.
Dann viel Spass bein Güllen
euer monteur1

Version 2.0
Here is the version 2.0 my manure packs.
What was done:
1. All the hoppers can now be used by the fieldjobs.
2. Vogelsang SwingUp now works on all barrels. In addition, you can now with folded – in linkage with the
Baffle plate or folded out with the tow hose gauges. The working width is 15 meters.
3. Veenhuis one-axis barrel added 16000l capacity.
4. Helper fixed, now works in all life situations. This should also solve the problem with Courseplay.
Perhaps this could be seen with courseplay.
5. Particleanimationen and Fass now switch off automatically when the filling level is empty.
6. Vogelsang SwingMax is now completly folded when buying and resetting.
7. Sub-split circuit parity cleaning fixed.
8. Suction tube pre-position now from 30 to 160 degrees possible.
9. Coli retrofitted in the suction pipes of the Veenhuis.
10. All dispensing devices are compatible with all barrels except for the SwingMax, which remains the tandem and tridem
Veenhuis barrels reserved.
11. Manual attaching does not work, because the mod does not recognize the two Attacher I installed, so please
To the manual attachingteam.
So that’s what I believe. Oh yes have a screenshot of the Gamemenue drange hangen, where you can see, where the input bindings are set. One should not believe how many do not know where the input bindings are occupied.
Thanks for your feedback. If you find something else, you can report. I can not accept the Dedi problems. I’m just missing the time, do not work.
Then a lot of fun
Your monteur1

Hello dear friends of realistic slurry spreading.
After much modding, scripting, 3D snip and game testing is finally my manure chain for the FS17 finished.
The description will now be a bit long, but I ask you to read it to the end, so in advance all the questions and possible Fehbedienung can be excluded. He has become a bit bulky so here is a brief overview of the vehicles.

Kotte TSA Tandem 24000L
Kotte TSA Tandem 30000L
Kotte TSA Triedem 30000L
Kotte Feldrandcontainer
Veenhuis tandem 24000L
Veenhuis Triedem 31000L
Zunhammer TV 21000L
Zunhammer PE 22500L
Zunhammer Vibro
Zunhammer Zunidisc
Möscha swivel manifold
Väderstad Carrier 820
Fliegl Dolly abridged
Vogelsang SwingMax30
Vogelsang SwingUp15

So here come the descriptions of the individual devices. In general. All drums have an animated suction arm (Mouse Control) and a suction nozzle Animated. Do you know maybe from Kotte Quattro Bayerbua from the FS15. Thank you for the idea and Bayerbua Upside Down, the already announced the release of the scripts me in FS15. So, it is exactly the spout to meet until the icon of the sharing service is overcharging. The spout follows the pipe. Then press Input Implement extra 3 then there you go. The overcharge rate is about 9000l / min at Real Time game (ie time x1). If the game time is accelerated, the overcharge rate goes up accordingly.

In the Zunhammer TV and the Veenhuis barrels you have the opportunity about InputBinding TOGGLE PIPE tube pre-positioning. The position can be adjusted between 60 ° and 160 °. All InputBindings are not defaulted. So first you should the functions in the InputBindings assign a button, otherwise nothing works. Have not deliberately done because eh any functions which will have different.
Let the Kotte feeders on. The Kotte TSA Triedem scored automatic lift axles. Means that from a level above 5% the rear axle automatically moves down. From a level above 60%, the front lift axle moves down. When Veenhuis Triedem the front axle is automatically lifted. In the ZIP file for Course Play lies. This simply replace in Course Play. Then all the barrels are also Course Play Tough. Have tried all feeder. Works flawlessly on the barn cesspit. Even with the Field border container. All feeders have the standard functions such as wheel and color choice.

To continue with the Zunhammer PE22500. This scored a telescopic axle for soil conservation. First you need to fold out the barrel, and again press the button Implememt lower, so it is below. Is unfortunately otherwise. It can also be taken as a feeder for the other drums. At all barrels a Pflegebereifung can be configured, for those who want to inventory without damage Guellen in Growing.
Now for the Ausbringgeräten. In all dispenses between 10m3 / ha and 40m3 / ha can be selected. This appears in a Hud. The application rate is kept constant, no matter how fast you drive. You may like to check. Thus a precise fertilization is possible. I also have the Particle inserted from the manure as you can see in the pictures. The map must be sure not vorbeitet because his GIANTS standard feature. Thus, should work on each MAP. I like it. The dribble bar and Carriere’ve got a Paritclesystem on the hose ends.

The SwingMax earned an extra paragraph. It can be purchased separately in the shop. In order to better adapt it to the field size, barrel size, application rate, etc., it can be folded by 30m width to 24m in width and 18m in width. Consumption is of course adjusted. Moreover, it has got a section control. 10 Teibreiten can be switched in sequence from left to right or from right to left. With Reset all 10 are brought back online. Moreover, it can be raised for deployment in growing stock (or who wants to see the Parti Clean Imation). All functions should be interlocked to prevent incorrect operation. First, it needs to be expanded, otherwise garnix. Switched on and off it is over Implement and down.
So what else. Belief that the time had come. Since I alone Modde, I could not try everything. If you notice anything, just write a message. The barrels are all declared as “tank”. Otherwise this does not work with the application rate. So you always need a dispensing instrument. Therefore I have also made the Möscha swivel manifold from Fliegl Barrel purchasable, who wants to spend so much for a dispensing unit.

The log is error-free.
Well then have fun Guellen. And remember, only occupy InputBindings. Otherwise nothing goes.
Mfg your monteur1
show less

Credits:
Modell: Giants monteur1 Bjohn(Rohr Carrier)
Textur:
Script: Upsidedown monteur1
Idee / Konzept: monteur1 Bayerbua
Tester:
Sonstige:
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)


Why to use Farming Simulator 19 mods | Farming Simulator 22 mods?
Even though Farming Simulator 2019 / Farming Simulator 2022 is a great game, you can make it even more astonishing by installing Farming Simulator 19 mods / Farming Simulator 22 mods. There are plenty of mods for every part of the game so you can change or integrate whatever you like. All the FS 19 mods / FS 22 mods are absolutely costless, so you won’t spend anything trying to change the game according to your own wishes. Our main goal is to keep Farming Simulator 19 / Farming Simulator 22 community happy where everyone has a possibility to implement their ideas and enjoy playing a perfect game. If something looks disturbing, bothers you or maybe you just need to integrate more tools and supplements, simply use FS 2019 mods / FS 2022 mods. Not many games provide an opportunity to change it by individual needs, but Farming Simulator is different. You can do whatever you want just by installing LS 19 mods/ LS22 mods so it’s time for you to take action and fulfill even craziest ideas!



You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *