STEYR 8080 Turbo SK1 V 2 Used for FS 17
Version 2 Used
– second XML inserted for the 8080a SK1 ÜS (Überhersssererien) Model BJ 1986
– 8080a SK1 ÜS has a STEYRMatic load gearbox (16v / 16r gears) 40 kmh
– 8080a SK1 ÜS is only available as 4WD and has the SK2 roof (STEYR roof trim front + roof hatch )
– 8080a SK1 ÜS: exhaust models; Low noise Exhaust + flap Auspuffmit curved pipe
– 8080A SK1 excess sludge: kotis added front and made on / degradable
– 8080A SK1 excess sludge: open front pane
– other diesel tank rigged (ned perfect but you can let ^^) and built
– VA ( Front axle) protection or VA + floor protection (for forestry use) buyable via 2. Design Konfi
– wheel set standard 2WD installed (8080 SK1)
Hello, today we introduce you the LS17 version of the STEYR 8080 Turbo SK1.
It will remain the only SK1 model for LS17, but there will be updates. This tractor is intended for people who like to play with old-timer as a supplement to the Plus 768. It has a 30 kmh transmission with 16v / 8r gears.
INFO:
Construction period: 197 (8) 9- 1995 / (96)
Engine: Steyr WD411.88 (70HP, as of BJ 1984 72 hp)
Transmission: Synchronized STEYR group transmission with 16 forward / 8 reverse gears, 30 kmh version
Tank capacity: 86l
Weight: approx. 3300 kg
Type plate
Sound is from a STEYR 8080 Turbo SK2
A great THANKS goes to forbidden-mods for sharing to the Siloking Terminal .
features:
from the outside:
Front fender / front fender (only for 2WD, 4WD does not have front fender)
Doors on / off button R
Open / close left button R
Opening / removing snow chains (front / rear) Button R
Shop configurations:
Coupling Products:
Standard / front spoiler: (atacher joint installed)
Front hydraulics + front spoiler (Dynamic Hose ready)
Front loader attached:
(Dynamic Hose ready)
With front protection
Without front protection
Engine Version: 70 hp without “Turbo” -letter on the bonnet :
Exhaust + flap BJ 79 (including sticker, STEYR Weltmeisterserie 1979)
Exhaust pipe BJ 82
Low noise exhaust 1 (not original, retrofitted / selfmade)
72 hp with “Turbo” lettering on the bonnet:
Exhaust + flap BJ 84
Exhaust pipe BJ 85
Low noise exhaust 2 (not original, retrofitted / selfmade)
Wheel setup:
4WD:
Original: front: 280/85 / R24 rear: 340/85 / R38
Standard: front: 360/70 / R24 rear: 420/85 / R34
Original + standard: front: 280/85 / R24 rear: 420/85 / R34
Standard + twins: front: 360/70 / R24 rear: 420/85 / R34 + twins
2WD:
Original: front: from the rear 768: 340/85 / R38
Pipe rims: front: from the rear 768: 230/95 / R44
Design:
STEYR roof mount front
STEYR roof trim front + rear
Other functions:
IC control:
Rear, side windows and doors (including door closing sound) for opening / closing
FH-Unterlenker, co-driver’s footrest and sun visor fold in / out
windshield wipers
cabin light
Siloking Terminal fade-out / fade-out
Animated / Illuminated:
Tacho, tank and temperature display as well as pressure air display
Blinker / warning indicator (including turn signal (from a Steyr 8130a SK2))
Blinker / warning light indicator works as in real:
Tractor alone = 1 beam flashes
Tractor + 1 trailer = 2 lights flashing
Tractor + 2 trailers = 3 lights flashing
license plate light
Charge indicator light integrated (battery lit jz at engine start)
“provisional” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select tractor)
at selected tractor without attached trailers / equipment: animated rear hydraulic + lever (right in the tractor) TASTE V ,
Animated lever for the PTO coupling (on the left in the tractor) BUTTON B , this is a small toy so that something moves in the cabin, this is pure optics, so that the levers with attached devices move you need a suitable script, we guess. 🙂 With trailers attached you can lift the HH (rear hydraulics) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellenkupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.
Others:
Textures reworked
Model has been revised
Chain saw installed as decoration
genuine tire moldings were used
washable
Indoorsound (reacts to open windows or doors)
Working light front Button NUM 5
Working light rear button NUM 6
swing axle
Behrahrerskript installed
Low beam + high beam + workbeam somewhat yellowish as well as in real life
Drive Control:
http://www.fsmods17.com/drive-control-v4-10-fs17/
Front loaders:
http://www.fsmods17.com/front-loader-medium-tractors-hydrac-ek-2200-fs-17/
Gearbox Add On:
http://www.fsmods17.com/gearbox-addon-2-0-0-9-fs-17/
